technical data sheet rpc-n 50 ? attenuator plug/plug 05AS102-S03S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 61169-16 ; cecc 22 210 ; mil-std 348a/402 documents n/a material and plating connector parts material plating center conductor brass gold, min. 1.27 m, over nickel outer conductor stainless steel passivated coupling nut stainless steel passivated dielectric ppe substrate al 2 o 3
technical data sheet rpc-n 50 ? attenuator plug/plug 05AS102-S03S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 ? frequency range dc to 18 ghz return loss ? 26.4 db, dc to 4 ghz ? 23.1 db, 4 ghz to 12.4 ghz ? 19.1 db, 12.4 ghz to 18 ghz attenuation 3 db ? 0.3 db, dc to 8 ghz 3 db ? 0.5 db, 8 ghz to 12.4 ghz 3 db ? 0.8 db, 12.4 ghz to 18 ghz power handling 2 w at 25 c mechanical data mating cycles ? 500 maximum torque 1.70 nm recommended torque 1.10 nm gauge 5.28 mm to 5.36 mm environmental data operating temperature range 1 0 c to +50 c storage temperature range -40 c to +85 c 2002/95/ec (rohs) compliant 1 temperature range over which these specifications are valid. packing standard 1 pce in box weight 67.0 g/pce draft date approved date rev. engineering change number name date kerstin herzog 05/01/05 frank wei? 24/ 01/12 e00 11-0832 marion striegler 19/01/12 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
